Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Other

FSA BB30 Inner Snap Ring Set
$5.99
Snap rings are pretty ingenious, except they love to launch in an impossible-to-track direction when removing or installing. Maybe you should keep a spare set of these BB30 Inner Snap Rings, just in case.
Problem Solvers 11-Speed Freehub Spacer for 10-speed cassette
$5.99
Problem Solvers' 11-speed Freehub Spacer converts your 11-speed freehub body to accept a 10-speed casssette. Use this spacer if you are running a 10-speed drivetrain on a new set of wheels with a 11-speed freehub body. The spacer is 1.85mmm thick.
Problem Solvers Steerer Tube Shim
$5.99
The Problem Solvers Steerer Tube Shims are for installing 1-1/8-inch diameter threadless stems on 1-inch diameter threadless forks. The shim is made of light, durable anodized aluminum and is chamfered on the ends for easy stem installation.
Salsa Alternator Flat Mount Hardware Kit
$5.99
Replacement hardware kit for Salsa Alternator Flat Mount dropouts. - For use only on frames designed for the Alternator Flat Mount standard
Sunlite Alloy Seatpost Shims
$5.99 - $8.80
• Shim available in various sizes • For use with 25.4mm or 27.2mm seatposts
Sunlite Specialty BB Axle Bolt
$5.99
- Large Flange-Fits Splined MX Cranks - Sold in pairs
SRAM Flat Mount Disc Caliper Bracket Bolts
$6.00 - $23.99
Flat Mount Disc Caliper Bracket Bolts
SRAM TT Brake Lever Hardware Kit
$6.00
TT Brake Lever Hardware Kit
Salsa Chainstay Protector
$6.00 - $20.00
Chainstay protectors to guard your Salsa frame from scratches and damage.
Shimano Dura-Ace R9100 Rear Derailleur Cable Adjusting Unit
$6.00
Need a spare Shimano cable adjuster assembly for your Dura-Ace R9100 rear derailleur? You've found it. Making sure this part is in working order can mean the difference between a two-second barrel twist to return your shifting to perfect, or getting out the multi-tool to readjust the cable again and again until it's close enough to get home. Your choice.
Surly Cross Check Frame Replacement Dropout Screws
$6.00
Replacement dropout screws for the Surly Cross Check. - Bolt length: 40mm
Surly Hurdy Gurdy Slider
$6.00
- Surly Chain Tensioner part
Surly Straggler Frame Replacement Dropout Screws
$6.00
Replacement dropout screws for the Surly Straggler. - Bolt length: 40mm
Surly Tuggnut/Snuggnut Slider
$6.00
- Replacement slider for the Surly Tuggnut and Snuggnut
Surly Tuggnut/Snuggnut Stainless Steel Thumb Screw
$6.00
- Replacement thumb screw for the Surly Tuggnut/Snuggnut
Zipp End Plug Cable Guide Vuka Extension
$6.00
Zipp Speed Weaponry Vuka Extension End Plugs - Plastic bar end plug pair for 22.2mm extensions
Zipp Service Course Bar End Plugs
$6.00
ZIPP Service Course Bar End Plugs, Qty 2.
Surly Bearing Pre-Load Cap Non-Drive Crank Bolt
$6.50
Surly bearing adjust caps for Mr. Whirly and OD
SRAM Steel Chainring Bolt Kit
$6.54
- Length: 8 mm, 5.5 mm - Material: Steel - Type: Hex - Set of 4 x 2
Sunlite Alloy Seat Clamp
$6.59 - $9.99
• Aluminum clamp with a chromoly bolt
SRAM Brake Pad Spreader Springs
$6.60
Brake Pad Spreader Springs - Available for Guide Ultimate and Guide X0 brakes
Wheels Manufacturing Inc. Ball Bearing Retainer
$6.75 - $17.50
Grade 300 retainer bearings for headset and bottom bracket service. - 10 Retainers/Bag
Wheels Manufacturing Inc. Chainstay Protector
$6.95
Wheels Manufacturing Clear Chainstay Protector w/ Alcohol Prep Pad keeps your frame's paint looking good and helps quiet any chain slap on the chainstay.
Problem Solvers Cantilever Stud
$6.99
The Problem Solvers Cantilever Studs screw into the bosses built into bicycle frames to provide the proper mounting studs for brakes. Each brake requires two studs.
Problem Solvers Seat Binder Bolts
$7.49
Notched binder bolts for frames with integrated seat collars. Details: CroMoly steel bolts Three lengths available: 16, 19 and 21mm 8mm diameter
Cane Creek Shock Spring Converter Clip
$7.75
- Enables Double Barrel springs (1.43" ID x 2.10-2.19 OD) to be run on other brand shocks
Ritchey Classic Stem Top Cap
$7.95
Featuring a tasteful High Polish Silver finish with laser printed logo, this top cap perfectly matches the graphics on Classic stems for a clean, coordinated aesthetic. Compression bolt and plastic bolt cover are included. - Material: alloy - Includes top cap, bolt, and plastic cap - Fits with 1-1/8" stems - Weight: 8g
Wheels Manufacturing Inc. Chainstay Protector - Wide
$7.95
Wheels Manufacturing Wide Chainstay Protector w/ Alcohol Prep Pad keeps your frame's paint looking good and helps quiet any chain slap on the chainstay. Wide design offers extra coverage for larger chainstays.
Bontrager Race Lite Ergo Bar Ends IsoZone Bar Adapters
$7.99
Key features: - Adapter to fit Bontrager Race Lite Ergo Bar Ends to Bontrager Satellite Plus IsoZone Handlebars - Only compatible with the Bontrager Satellite Plus IsoZone Handlebar - For most other bar ends, use: Bontrager Satellite Plus IsoZone Bar End Adapter