Bottom Brackets

$8.79 - $19.99
- One-piece bottom bracket cup set
- Bearings included
- Shell: 68mm
- Spindle Type: OPC
- Cup Material: Steel
- Weight: 265 grams

$12.99 - $29.99
BB-UN26 cartridge bottom bracket.
- Smooth rotation
- Square taper spindle
- Sealed cartridge bearing assembly

$19.99
- Enables the use of a MegaExo (24mm spindle) crankset on a BB90 (Trek Madone) frame
- Choose MegaExo carbon (ceramic bearings with red-anodized aluminum shields) or alloy (stainless steel bearings with black plastic shields)

$20.99
Shimano BB-ES300 Octalink V2 Bottom Brackets
- Fits Shimano Octalink V2 Spline Cranksets
- Crankarm fixing bolts not included

$23.49 - $32.00
Shimano's BB-UN55 Square Spindle Bottom Brackets are the unofficial standard for English-threaded cartridge bottom brackets. Quality, value, and durability come together to keep you cranking for many, many miles.
- Fits JIS Square-Taper Cranksets
- Hollow spindle
- Crankarm fixing bolts not included

$24.99 - $28.99
Running a conventional threaded bottom bracket on your BB30 or PF30 frame doesn't have to be complicated. This press-fit adapter from FSA goes in snug and opens up a lot of crankset possibilities for your BB30/PF30 frame.
- Aluminum
- Allows conventional threaded bottom brackets to be installed in a BB30 or PF30 frame
- Install with headset press (not included) and green Loctite (included)

$31.99 - $38.99
Shimano's Ultegra bottom bracket uses Pro Tour-proven technology for lighter weight and super smooth spinning, while still maintaining the same level of durability and stiffness. It's available in English, Italian, or Press Fit models.

$33.99
• Lightweight seal structure removes grams
• Durable anodized finish
• Includes left and right hand cups, spacers, inner cover, and inner o-rings
• Easy installation with TL-FC25 tool
• Compatible with 24mm crank spindles
• English, threaded: 68/73mm bottom bracket
• Pressfit: BB86/92 bottom brackets

$35.00
- Adapters press directly into specific PF30, BB30, BB86 or BBright frames and allow the use of standard Ultra-Torque (UT) crank sets and EPS components
- Updated design increases surface area contact with the frame's bottom bracket, reducing the possibility of noise from frames with slight imperfections
- Ultra-Torque OS Fit BB-cup tool is required for adapter installation

$35.99
This FSA Bottom Bracket allows you to run MegaExo and other 24mm spindle cranksets with a BB86/BB89.5/BB92 frame.
- Intended for road use
- Steel bearings

$35.99
$42.99
16% Off
SRAM's GXP Team PressFit MTB Bottom Bracket Cups are the premium choice for getting the most out of every pedal stroke. They feature smooth bearings that keep drag to a minimum and seals that keep debris out. Plus, these BB cups press directly into the frame without having to be threaded in for reduced weight and enhanced durability.

$36.59
- Compatible with both American and Mid style BB shells
- 6061-T6 full CNC alloy construction
- Anodized surface finish
- Weight: 255g
- Cup Type: Press Fit
- Cup OD/Bearing OD: 41mm or 51mm

$36.99
This FSA MegaExo bottom bracket is for use MTB MegaExo cranksets with 24mm spindles.
- Sealed bearings
- Die-cast then CNC machined alloy bearing cups
- Composite Di2-compatible adjustable center sleeve

$36.99
Pressfit Model:
• For use on BB86/92 bottom bracket shells
• Compatible with 24mm spindle Hollowtech II cranksets
• BB Shell Width (mm): 92 mm
• BB/Frame Interface: BB86 , BB92
• Bottom Bracket Shell I.D.: 41
• Defined Color: Black
• Spindle Interface Type: Shimano Hollowtech II
Threaded Model:
• Includes 3 x 2.5mm spacers
• Includes TL-FC24 adapter tool
• Reduced size for light weight
• New seal construction for smoother rotation
• Requires TL-FC34 or included TL-FC24 adaptor for installation & removal
• BB Shell Width (mm): 68 mm
• BB/Frame Interface: English
• Defined Color: Black
• Spindle Interface Type: Shimano Hollowtech II
• Weight: 77 g

$37.99
Get more distance out of every pedal stroke with SRAM's BB30 Bottom Bracket Assembly. It features sealed bearings for a smooth pedal stroke and impressive reliability. Plus, it presses directly into your frame's BB30 bottom bracket shell for reduced weight and increased longevity.

$37.99 - $38.00
The SRAM DUB bottom bracket series has a simple job— to connect crankarms and protect the smooth, long-lasting application of power to the drivetrain. SRAM engineered the oversized DUB spindle to work across every bottom bracket standard, simplifying crankarm compatibility.
- Gutter Seal Technology drastically improves sealing against the elements
- Sealed cartridge bearings
- One oversized spindle to work across every bottom bracket standard
- Significantly lighter than GXP system

$37.99 - $45.99
The SRAM DUB bottom bracket series has a simple job— to connect crankarms and protect the smooth, long-lasting application of power to the drivetrain. SRAM engineered the oversized DUB spindle to work across every bottom bracket standard, simplifying crankarm compatibility.
- Gutter Seal Technology drastically improves sealing against the elements
- Sealed cartridge bearings
- One oversized spindle to work across every bottom bracket standard
- Significantly lighter than GXP system

$38.00
The SRAM DUB bottom bracket series has a simple job—to connect crankarms and protect the smooth, long-lasting application of power to the drivetrain. SRAM engineered the oversized DUB spindle to work across every bottom bracket standard, simplifying crankarm compatibility.
- Compatible with Cannondale Ai frames
- Gutter Seal Technology drastically improves sealing against the elements
- Sealed cartridge bearings
- One oversized spindle to work across every bottom bracket standard

$40.99
There's precious little that's better than a fresh bottom bracket. This complete FSA BB30 Bottom Bracket contains 2 stainless steel bearings, 2 C-Clips, 2 dust covers, and 1 adjustment washer.

$41.99
Shimano Dura-Ace BB92, BB9000 Hollowtech II Bottom Brackets
- Bottom Bracket Shell I.D.: 1.37"
- Defined Color: Black
- Weight: 65 g
- Spindle Interface Type: Shimano Hollowtech II

$42.99
The SRAM DUB bottom bracket series has a simple job—to connect crankarms and protect the smooth, long-lasting application of power to the drivetrain. SRAM engineered the oversized DUB spindle to work across every bottom bracket standard, simplifying crankarm compatibility.
- Gutter Seal Technology drastically improves sealing against the elements
- Sealed cartridge bearings
- One oversized spindle to work across every bottom bracket standard

$42.99
SRAM's GXP PressFit Road Bottom Bracket Cups are the premium choice for getting the most out of every pedal stroke. They feature smooth bearings that keep drag to a minimum and seals that keep debris out. Plus, these BB cups press directly into the frame without having to be threaded in for reduced weight and enhanced durability.

$43.00
The SRAM DUB bottom bracket series has a simple job—to connect crankarms and protect the smooth, long-lasting application of power to the drivetrain. SRAM engineered the oversized DUB spindle to work across every bottom bracket standard, simplifying crankarm compatibility.
- Gutter Seal Technology drastically improves sealing against the elements
- Sealed cartridge bearings
- One oversized spindle to work across every bottom bracket standard

$43.00
The SRAM DUB bottom bracket series has a simple job—to connect crankarms and protect the smooth, long-lasting application of power to the drivetrain. SRAM engineered the oversized DUB spindle to work across every bottom bracket standard, simplifying crankarm compatibility.
- Gutter Seal Technology drastically improves sealing against the elements
- Sealed cartridge bearings
- One oversized spindle to work across every bottom bracket standard

$44.99
Designed to be used with X-Type or EXI cranksets. Manufactured from high strength aluminum & featuring custom retainer bearings.
Features
• BB Cups are forged & CNC machined from 6066 aluminum.
• Tapering wall construction to minimize weight.
• Custom 6805 16 ball retainer bearing
• Bearings feature our custom triple wiper seal to better retain grease & keep contaminants out.
• Bearings are factory filled with Phil Wood waterproof grease — tested & proven to extend bearing life.
Page 1 of 5
Next page